DMX ProFusion iS Uživatelská příručka stáhnout pdf (Strana 10)

PROFUSION i S USER GUIDE

Basic Operation

Powering ProFusion iS On and O

Always use the Power button on the back panel of the ProFusion iS to power o ProFusion iS before

unplugging it from an electrical outlet. Failure to do so may result in damage to the device.

Powering On ProFusion iS

STEP 1 Place the main power button on the rear of the ProFusion iS in the ‘On’ position.

STEP 2 The power indicator will illuminate. After approximately 10 seconds the LCD control panel will illumi-

nate and display dmx profusion is.

STEP 3 Playback will begin after approximately 25 seconds. The LCD control panel will display the title/artist

information of the content currently playing.

Note: If your ProFusion iS is powered on during a time the device is not scheduled for playback, the

LCD control panel will display music stopped and the time playback is scheduled to begin.

Powering O ProFusion iS

If your device is congured to receive its updates via Ethernet, your ProFusion iS must remain pow-

ered on at all times.

STEP 1 Press the Standby button once (do not hold the button in).

STEP 2 Approximately 10 seconds after the pressing the Standby button, ProFusion iS will enter a Standby

Mode. At this time playback on all zones will stop. The ProFusion iS can receive updates via Ethernet in

this mode. See section on ‘Standby Mode’.

STEP 3 Once ProFusion iS is in Standby Mode;presstheStandbybuttononcetocompletetheshutdownpro-

cess. This will take approximately 20 seconds. The ProFusion iS will not receive updates via Ethernet in

this mode.

STEP 4 It is now safe to place the main power button on the rear of the ProFusion iS in the ‘O’ position. NOTE:

NeverremovetheProFusioniSpowercordbeforepressingthe“Standby”buttontwice,waitingforthe

LCD display to turn o and then placing this button in the ‘O’ position

Updating ProFusion iS via CD

ProFusion iS can be updated via Ethernet or CD. It is important to update your device as soon as you receive

any update CDs. Please note that customers with devices configured for Ethernet updates may still receive CD

updates, and should load them as soon as they arrive.

Always verify the update disc is clean and free of scratches, smudges and fingerprints. To clean a CD use a lint-

free cotton cloth and wipe against the tracks, starting in the middle of the disc and wiping towards the outside

of the disc. Do not wipe in a circular motion as this can create scratches.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Žádné komentáře

DMX ProFusion iS Uživatelská příručka Strana 10